Bruce Roberts Spray 22, Project
- Boat REF# · 127555
- Length · 22'0"
- Year · 2011
- Construction · GRP
- Underwater profile · Long Keel
- Sleeping berths · 2
- Engine · 1 x diesel 9hp, Yanmar RGM (2011)
- Lying · Chesham
This boat is off the market but here are some boats that are still For Sale
Extra Details
| Designer | Bruce Roberts |
|---|---|
| Builder | Owner |
| Lying | Chesham |
Mechanical
| Engine | 1 x diesel 9hp |
|---|---|
| Engine make and model | Yanmar RGM (2011) |
| Engine Hours | Not Recorded |
| Engine Cooled | Direct |
| Steering | tiller |
| Drive | shaft |
| Fuel consumption (approx) | Not Recorded |
Dimensions
| Length | 22'0" |
|---|---|
| Beam | 7'4" |
| Storage | Ashore |
Sails
No sails mast or rigging apart from bowsprit.
Electrical Systems
12 volt battery, 2 batteries charged by: engine
Construction
| Construction | GRP |
|---|---|
| Underwater profile | Long Keel |
| Finish | Paint finish |
This lovely hull is 90% complete and was constructed by an aerospace engineer/yachtmaster. Hardwood laminated frames, cedar planking finished with two coats heavy GRP. Soft wood long keel.
Deck and Cockpit- Teak / Iroko, brass fittings. Cockpit sides Brazilian mahogany. Detachable Douglas fir bowsprit with fittings.
Porthole castings and perspex windows ready to fit.
Included: Lead for keel and pattern. depth sounder, compass stainless steel anchor.
Accommodation
| Total # of berths | 2 |
|---|---|
| No. of single berths | 2 |
| Cabin(s) | 2 |
| Heads | 1 heads (Porta Potti) |
Cabin part complete, chart table, electrics panel, Origo stove, galley sink and cabinet. Twin berth, portaloo, Radio, music centre.
2 burner Stove
Accommodation
| Stove | |
|---|---|
| Sink |
Cabin part complete, chart table, electrics panel, Origo stove, galley sink and cabinet. Twin berth, portaloo, Radio, music centre.
2 burner Stove
Deck Gear
| Boathook |
|---|
1 anchors
Safety Equipment
| Horn |
|---|
1 bilge pumps (0 manual / 1 electric)
Construction carried out in accordance with EA Safety scheme rules.
Broker's Comments
This is a very interesting, largely completed project, with some very beautiful features.
The builder lists the following work still to be done:
Some deck planking
Engine exhaust fitting
Fuel tank and fuel line
Upholstery
Replace batteries
Fit port holes (casting and perspex ready)
Mast Step to fit (Already made)
Keel to cast and fit (lead ready, pattern made)
Mast, sails and rigging required
These boat details are subject to contract.
Note: Offers on the asking price may be considered.