Jeanneau Sun 2500
2016 Engine 3DL laminate sails
- Boat REF# · 301617
- Length · 24'7"
- Year · 2006
- Construction · GRP
- Underwater profile · Lifting Keel
- Sleeping berths · 4
- Engine · 1 x gasoline 9.9hp, Yamaha (2016)
- Lying · Hayling Island
This boat is off the market but here are some boats that are still For Sale
Extra Details
Designer | Olivier Petit |
---|---|
Builder | Jeanneau Yachts |
Lying | Hayling Island |
Fuel capacity | 6.6 USG Total - 2 Tanks |
Last survey | 03/10/2016 |
Mechanical
Engine | 1 x gasoline 9.9hp |
---|---|
Engine make and model | Yamaha (2016) |
Engine Hours | Not Recorded |
Engine Cooled | Direct |
Steering | tiller |
Drive | outboard |
Fuel consumption (approx) | Not Recorded |
Dimensions
Length | 24'7" |
---|---|
LWL | 23'6" |
Beam | 9'6" |
Draft Min | 2'4" |
Draft Max | 5'7" |
Displacement | 10,096.7lbs |
Storage | On marina |
Rig
Sloop rigged Z Spars Aluminium spars (2006) with Stainless Steel standing rigging (2016)
Sails
Reefing mainsail | North - Slab (2017) Stack Pack, Lazy Jacks, 3 Reefs |
---|---|
Headsail | North - Furling (2017) |
Other sails | Gennaker (2006) |
Orig Main & Jib (2006) |
Electrical Systems
12 volt battery, 240 shore power voltage, 2 batteries charged by: engine, shore power
Construction
Construction | GRP |
---|---|
Underwater profile | Lifting Keel |
Finish | Gelcoat finish |
Accommodation
Total # of berths | 4 |
---|---|
No. of double berths | 2 |
Cabin(s) | 1 |
Heads | 1 heads (Porta Potti) |
Accommodation
Sink | |
---|---|
Freezer | |
Cabin heating | |
Manual water system |
Deck Gear
Sail cover | |
---|---|
Rode | |
Fenders | |
Boathook | |
Swim Ladder | |
Instrument Covers |
2 halyard winches
2 sheet winches
Nav Equipment
Compass | |
---|---|
Speed | |
Log | |
Wind | |
Autopilot | |
Navigation lights | |
Depth sounder | |
Radar Reflector |
Safety Equipment
Fume detector | |
---|---|
Carbon Monoxide detector |
Broker's Comments
A very smart looking pocket cruiser racer! She appears in good condition with a lot of recent upgrades.
Further owner comments when he bought her in 2016. The key items carried out by Deacons were:
1. Remove centreboard and rudders. Check centreboard pivot and renew all elements of lifting ropes.
2. Strip hull, centreboard and rudders. Epoxy and then coppercoat.
3. Remove mast for service and update. Masthead sheave replaced. Standing rigging and turnbuckles replaced. All running rigging replaced with dyneema. New wind vane fitted. New LED navigation light. New VHF aerial. New tinned cables for all. New wireless Raymarine wind instrument.
4. New mains shore system. New batteries with charging system from both mains and outboard.
5. Installed new Yamaha 9.9hp with electric start and remote controls.
6. Remove central heating unit and return to manufacturer for service.
7. Service winches.
There were a number of minor improvements such as a bund around the skin fittings so that any water entering was contained and did not go into the bilges.
Subsequently I had an issue with the rudder binding. I talked to one of the Jeanneau technical team and it was clear that the bearings were binding. This seemed to be an issue with a lot of the Sun 2500s, due to the nylon bearings swelling. I had new bearings made up out of Delrin. This will not absorb water so should be good for the life of the boat.
All sail controls have been taken back to the cockpit, including all reefing.
The boat has the optional gennaker kit with the removeable pole and bagged gennaker.
I purchased new 3DI laminate mainsail and genoa from North Sails in 2017.
The toilet is a Porta Potti, so the only hull fittings are the log/depth and the two sink outlets. All of these were checked by Deacons.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.
Owners FAQ's
How long have you owned the boat for?
since 2016
Why are you selling her?
Not using as often as would like to as I have another boat
Where have you sailed her?
Chichester