Scylla 44 Steel Passagemaker
- Boat REF# · 175615
- Length · 44'6"
- Year · 1978
- Construction · Steel
- Underwater profile · Long Keel
- Sleeping berths · 7
- Engine · 1 x diesel 80hp, Ford D Series (1978)
- Lying · North Wales
This boat is off the market but here are some boats that are still For Sale
Extra Details
| Designer | Robert Tucker |
|---|---|
| Builder | Rob Durbi |
| Lying | North Wales |
| Last survey | 01/03/2011 |
Mechanical
| Engine | 1 x diesel 80hp |
|---|---|
| Engine make and model | Ford D Series (1978) |
| Engine Hours | Not Recorded |
| Engine Cooled | Indirect |
| Steering | wheel |
| Drive | shaft |
| Prop(s) | 3 Blade |
| Fuel consumption (approx) | 1.5 USG /hour At Cruising Speed |
| Cruising speed (approx) | 6 knots |
| Max speed (approx) | 8 knots |
Engine Hydraulic Drive, 4 Cylinders
Dimensions
| Length | 44'6" |
|---|---|
| LWL | 40'8" |
| Beam | 12'3" |
| Draft Min | 4'9" |
| Draft Max | 4'9" |
| Displacement | 31,972.5lbs |
| Headroom | 6'7" |
| Storage | Ashore |
Rig
Ketch rigged Aluminium spars (1978) with Stainless Steel standing rigging (2011)
Sails
| Reefing mainsail | - Slab () |
|---|---|
| Headsail | - Furling () |
| Other sails | Mizzen () |
| Genoa No.2 () | |
| Spinnaker () |
Electrical Systems
12 volt battery, 6 batteries charged by: engine, shore power
Construction
| Construction | Steel |
|---|---|
| Underwater profile | Long Keel |
| Finish | Paint finish |
Built by Ron Durbin to a Robert Tucker design and based on a Ryton 38
Long Keel with Bilge Keels
Steel Hull,Deck & Superstructure
Accommodation
| Total # of berths | 7 |
|---|---|
| No. of double berths | 2 |
| No. of single berths | 3 |
| Cabin(s) | 2 |
| Heads | 1 heads (Manual) |
Hot water Calorifier
2 burner propane Stove
Accommodation
| Stove | |
|---|---|
| Broiler | |
| Oven | |
| Sink | |
| Drapes | |
| Manual water system | |
| Pressurised water system | |
| Hot water system | |
| Microwave |
Hot water Calorifier
2 burner propane Stove
Deck Gear
| Sail cover | |
|---|---|
| Boathook | |
| Swim Platform | |
| Swim Ladder | |
| Instrument Covers |
2 halyard winches
2 sheet winches
Manual windlass
1 anchors
(Bruce)
Nav Equipment
| Compass | |
|---|---|
| Speed | |
| Wind | |
| Radar | |
| VHF | |
| GPS | |
| Autopilot | |
| Depth sounder |
Furuno Radar
Furuno GPS
Garmin GPS
Handheld VHF
Nico Autopilot
Clipper Wind
Clipper Depth
Sailor VHF
Safety Equipment
| Swim ladder |
|---|
3 bilge pumps (1 manual / 2 electric)
Broker's Comments
This Scylla 44 was built for serious passagemaking and has had just 2 owners from new.Her heavy steel build allows her to deal with most weathers.The vessel requires an owner who can continue to update her to her former self and enjoy what is a remarkable ketch. She is equipped with lots of navigation aids and electronics.T he rigging was replaced in 2011 and so was the Furling gear. It is a boat full of character with ample space and storage.
She was built following a Robert Tucker design and based on the Ryton 38.A ge and ill health brings her to the market. An amazing boat deserving a conscientious new owner.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.