Steel Cutter 40' OOD
Project
- Boat REF# · 171173
- Length · 40'0"
- Year · 1977
- Construction · Steel
- Underwater profile · Long Keel
- Sleeping berths · 6
- Engine · 1 x diesel 0hp, 6 cyl ()
- Lying · Devon
This boat is off the market but here are some boats that are still For Sale
Extra Details
| Designer | W. (Bill) Bollard for Boat Plans Co. Sydney |
|---|---|
| Lying | Devon |
| Fuel capacity | 120.0 USG Total - 1 Tanks |
| Water capacity | 60.0 USG Total - 1 Tanks |
| Last survey | 01/06/1989 |
Mechanical
| Engine | 1 x diesel 0hp |
|---|---|
| Engine make and model | 6 cyl () |
| Engine Hours | Not Recorded |
| Steering | wheel |
| Drive | shaft |
| Prop(s) | bronze |
| Fuel consumption (approx) | Not Recorded |
Dimensions
| Length | 40'0" |
|---|---|
| Beam | 12'0" |
| Draft Min | 5'9" |
| Draft Max | 5'9" |
| Airdraft | 52'0" |
| Displacement | 28,665.0lbs |
| Headroom | 6'1" |
| Storage | Ashore |
Rig
Cutter rigged Original Aluminium spars (1977) with Galvanised standing rigging ()
Sails
| Reefing mainsail | - () |
|---|---|
| Headsail | - () |
| Spinnaker gear |
|---|
There is a large wardrobe of sails that are stored indoors. Unable to determine exact details.
Mast steps to the masthead.
Electrical Systems
12 volt battery, 1 batteries charged by: engine
Construction
| Construction | Steel |
|---|---|
| Underwater profile | Long Keel |
| Finish | Paint finish |
Accommodation
| Total # of berths | 6 |
|---|---|
| No. of double berths | 1 |
| No. of single berths | 4 |
| Cabin(s) | 3 |
| Sink | 1 |
| Heads | 1 heads (Vac flush) |
The design plans show 7 single berths arranged in the fore cabin, saloon and quarter berths. However this vessel has been built with a aft cabin with a double berth in it.
Brand new upholstered cushions have now been made for the vessel using fire resistant material.
2 burner propane Stove
Accommodation
| Stove | |
|---|---|
| Broiler | |
| Oven | |
| Sink | |
| Manual water system | |
| Fresh water wash | |
| Non-Smokers |
The design plans show 7 single berths arranged in the fore cabin, saloon and quarter berths. However this vessel has been built with a aft cabin with a double berth in it.
Brand new upholstered cushions have now been made for the vessel using fire resistant material.
2 burner propane Stove
Deck Gear
2 halyard winches
4 sheet winches
1 anchors
(Plough)
Fleming Major windvane self-steering system
Nav Equipment
| Compass | |
|---|---|
| Speed | |
| Log | |
| GPS | |
| Chart plotter | |
| Navtex | |
| Navigation lights | |
| Depth sounder |
None of the navigation gear has been tested.
Safety Equipment
| Liferaft | |
|---|---|
| Life buoys |
2 bilge pumps (1 manual / 1 electric)
Emergency beacon.
Broker's Comments
This steel cutter rigged sloop was designed by the well known Australian designer Bill Bollard and built in Australia. It is believed that she was then sailed to the Med and on to the UK, arriving in 1991. She has been neglected over the past few years and now needs restoration to her former glory. Fundamentally she is believed to be sound and some work is already being undertaken to bring her back to life. This is an opportunity to purchase her as is and do the work yourself or engage a skilled craftsman to restore her to your own specifications.
She would be a lovely ocean cruising vessel when completed.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.